Modes Overview (Home and Room)

In Vision+, you can manage heating settings for your entire home or for individual rooms using a set of modes. This gives you full control—either apply consistent settings across the house or fine-tune each room to suit your preferences.

Available Modes

1. Eco

   Maintains temperatures between 5°C and 19°C, recalling the last Eco setpoint. Ideal for energy savings.
   
   

2. Comfort

   Maintains temperatures between 19.5°C and 30°C, recalling the last Comfort setpoint. Best for everyday comfort.
   
   

3. Anti Freeze

   Keeps the temperature at a low fixed setpoint (usually 5–10°C, set by the installer) to prevent freezing. This setpoint can’t be changed in Vision+.
   
   

4. Off

   Turns heating off completely. Overrides any schedule or previous setting until reactivated.
   
   

5. Program

   Applies your scheduled heating plan:

   1. At home level, Program mode runs each room’s individual schedule (if one exists).

   2. If no program is defined for a room, the system will use the default home temperature as the fallback setpoint.

   3. At room level, the same logic applies—if there’s no room-specific program, the default home temperature will be used instead.

   4. Selecting Program will cancel any active manual override and return to scheduled behavior at the next time block.
      
      

6. Override

   Automatically activated when the temperature is changed manually from a device (e.g. thermostat or radiator valve).

   1. On the dashboard, an hourglass icon shows on the room tile.

   2. In the room view, a countdown label displays how long the override will last.

   3. You can cancel the override anytime by selecting another mode in the app.

Setting Modes at the Home Level

To do this:

• From the dashboard, tap the ‘Modes’ button in the top left corner.
• Select ‘Home mode’, then choose one of the available modes from the bottom sheet.

A pop-up will explain the selected mode—press ‘Activate’ to confirm or ‘Cancel’ to go back.

Setting Modes at the Room Level

To do this:

• Tap the mode icon directly on a room tile from the dashboard,

• or go into the room view and select the desired mode from the dropdown menu.

This gives you flexibility to adjust the temperature settings room by room, while still benefiting from centralized control if needed.